jailbreak iphone,Jailbreak manual for iOS 9, iOS 10 and iOS 11
This guide explains how to jailbreak iPhone and iPads with iOS 10 and earlier with Phoenix, Yalu, Pangu and TaiG. Also, you can read how to iOS 7 jailbreaks with evasi0n. For iOS 11, no jailbreak has yet been released.
We tell you what a jailbreak is and how to perform it safely. The first part of this guide is about the Yalu iOS 10 jailbreak, after which we set out the Phoenix jailbreak for iOS 9.3.5 and the Pangu / TaiG jailbreak that can be used for iOS 9 and iOS 8 . Finally, we discuss the older evasi0n jailbreak for iOS 6.
This manual was last updated in August 2017.
Currently, it is possible to jailbreak iPhones and iPads through iOS 10.2 with different tools, which are explained below. Important to know is that iOS 10.2 is not yet jailbreaking on iPhone 7 (Plus), and jailbreak iphone so if you have already updated this version then there is no more possibility. On older devices and with earlier versions iOS 10.0 and 10.1.1, it is possible.
The latest development is the Phoenix jailbreak, which only works on 32-bit devices
jailbreak iPhone for iOS 10
For iOS 10, the Yalu Jailbreak of Luca Todesco has appeared. He announced in December 2016 to make a jailbreak for iOS 10.1.x. A jailbreak for iOS 10.2 was not feasible at this time because Apple has poached relatively many security vulnerabilities. shsh2 blobs, which allowed to downgrade to older firmware version in the future, even if Apple no longer signed.
The situation depends on the iOS version that you now have on your device:
iOS 10.2.1 or beta of iOS 10.3:
- Returning to iOS 10.2 is unfortunately no longer possible because Apple and jailbreak iPhone
is no longer signing this version.
- 32-bit devices with iOS 10.2 are NOT jailbreaking (this applies to iPhone 4 / 4s, 5 / 5c and older). You can not downgrade and no suitable jailbreak method is available.
- iPhone 7 and 7 Plus with iOS and jailbreak iPhone 10.2 are NOT jailbreaking. You can no longer downgrade to iOS 10.1.1 and the Yalu jailbreak only works on other 64-bit devices.
- All other 64-bit devices with iOS 10.2 are jailbreak iPhone (ie, iPhone 5s, iPhone 6 / 6s, and iPhone 6 / 6s Plus).
iOS 10.0 to 10.1.1:
- 32-bit devices with iOS 10.0 through iOS 10.1.1 can NOT jailbreak (this applies to iPhone 4 / 4s, 5 / 5c and older).
- 64-bit devices with iOS 10.0 to 10.1.1 can you jailbreak.
- If you have an iPhone 7 (Plus), you can update to iOS 10.1.1.
- If you have an iPhone 6s (Plus), iPhone SE or iPad Pro, you can use the Yalu jailbreak for iOS 10.1.1, but you can also update to iOS 10.2 and use the Yalu jailbreak for iOS 10.2.
- Other 64-bit devices like the iPhone 6 (Plus) and iPhone 5s are not jailbreaking with iOS 10.1.1, so you’ll need to use the Yalu jailbreak for iOS 10.2.
- 64-bit devices: If you’re still on iOS 9.0 to 9.3.5 then you can choose to stay on these stable jailbreak versions. Something riskier is upgrading to iOS 10.2 and using the Yalu jailbreak.
- 32-bit devices: You can stay better on this version and wait for the FriedAppleTeam to release a jailbrokenk iPhone.
In all cases, it is wise to save your .shsh2 blobs. This can easily be done via TSSSaver, an online tool for which you do not have to enter terminal commands. You can also manually do this using the tssschecker tool via GitHub.
Yalu jailbreak for iOS 10 on Mac and Windows
The Yalu jailbreak is available for iOS 10.2 for both Mac and Windows. If you are looking for a detailed step-by-step plan, you might want to look at this: Mac and Windows. In addition, Cydia Impactor is used.
If you have an iPhone 7 or iPhone 7 Plus or a 64-bit device running on iOS 10.1.1, you can also use Yalu. Here’s a step-by-step plan for the Mac.
Phoenix jailbreak for iOS 9.3.5
Phoenix is the legendary bird who is out of the ash. This also applies to older 32-bit devices with iOS 9.3.5, which are now jailbreaking: you would think there would be no new method, but in August 2017 it was suddenly the Phoenix jailbreak. This jailbreak is very important because it is the latest update for devices like the iPhone 4s, iPad mini 1, iPad 2 and iPad 3.
The jailbreak is semi-untethered and only works on 32-bit devices. You will then reboot once again using the tool motion. It was made by two famous iOS hackers, Siguza and Tihmstar, with the help of previous hackers like Luca Todesco. The app has great similarities with the Home Depot jailbreak, which was intended for iOS 9.1 to 9.3.4. The code will not be made available as an open source. Initially, there were indications that there would also be an untethered version after that did not happen. Because the Cydia Extender does not work in iOS 9, you will need to load the app every week, unless you have an Apple developer account. If you saved your blobs, you can downgrade tfp0 to other firmware versions thanks to the presence of tfp0.
With Phoenix, and jailbreak iPhone you can still jail your older device like an iPhone 4s and probably it’s also the last thing that’s coming for this popular device. You can download it from the website where you can load Cydia Impactor.
Jailbreak iOS 9.2 to iOS 9.3.3
The Pangu team released a jailbreak for iOS 9.2 and iOS 9.3.3, which is only suitable for 64-bit devices. There will be no version for 32-bit devices.
Update July 2016: We are currently recommending using this jailbreak. You must enter your Apple ID and password for the PP app. Pangu promises that they do not store your data, but you always risk it. An alternative is to create a separate Apple ID, just for this jailbreak.
Update July 31, 2016: By now, all the first messages have appeared that login data has been abused.
The jailbreak is semi-untethered, which means that when you restart your device, you need to always run software to make the device jailbreak. In the meantime, an English version has also appeared in the Chinese language version.
According to Pangu, the jailbreak is easy to remove again by restarting the device. There are no traces left of the jailbreak. You must start the PP app to jailbreak again, after which you can see all previously installed tweaks. It’s a pretty unusual method, but it works.
Pangu for iOS 9.2 to 9.3.3 only works on the following 64-bit devices:
- iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE
- iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, iPad Pro
- iPod touch 6G
The Pangu jailbreak can be found on the team ‘s website.
For iOS 9.2 long time no jailbreak method appeared. Developer Luca Todesco claimed to have found a jailbreak for iOS 9.2, iOS 9.2.1 and iOS 9.3. He demonstrated this in a video. Later, he announced that he had found an exploit for iOS 9.3.3, but he also did not release it. Pangu has finally been able to make a working jailbreak.
Jailbreak iOS 9.1
The Chinese Pangu team used two exploits, allowing them to make a jailbreak method for iOS 9.0 to iOS 9.0.2 (see below). Apple has poached these two vulnerabilities in iOS 9.1. However, in March 2016, Pangu released a new jailbreak version that only works on 64-bit devices. This method is no longer in iOS 9.2 and can only be used by iOS 9.1. The jailbreak can be downloaded from the Pangu website. Of course, this also applies to Apple’s official software, so install it at your own risk at your own risk.
Jailbreak iOS 9 Pangu download now possible
Pangu has released the first public, untethered jailbreak for iOS 9. This is suitable for iPhone 6s and all other devices on which iOS 9 is installed. Also, iOS 9.0.1 and iOS 9.0.2 are supported. It is now technically possible to perform this jailbreak. Pangu is available for Windows and Mac.
The Pangu jailbreak is not an official software for iOS, so you install at your own risk. Make sure you have a backup of all your data, in case the process fails. Also, by jailbreaking you can lose your warranty or get malware. Before you begin, you need to turn off your PIN and Search My iPhone to increase the chance of a successful iOS 9 jailbreak. If it fails, you should first restore the firmware on your iPhone via iTunes and then try again to jailbreak.
Manual jailbreak iOS 9 with Pangu
Follow these steps to run the Pangu jailbreak for iOS 9 and load Cydia. It works on both Mac and Windows. The jailbreak method is suitable for any iPhone, iPad or iPad touch running iOS 9, including the iPhone 6s and iPhone 6s Plus.
- Back up your iDevice and connect it to your computer using a USB cable.
- Turn on “Find my iPhone” from Settings> iCloud> Find my jailbreak iPhone.
- Turn off your PIN through Settings> Touch ID and Access Code.
- Put your device in airplane mode.
- Download Pangu via the website.
- Start the Pangu jailbreak for iOS 9 by clicking the Start button.
- Please indicate that you already have a backup by clicking Already Backup.
- The iDevice will restart and you will get from Pangu the instruction to resume airplane mode.
- The process is now proceeding. After a while, you get the message that you need to open the Pangu app on your iDevice’s home screen.
- Pangu is now requesting permission for your photo library. Accept to continue.
- After a reboot, you can turn on the airplane mode and start using your iPhone. The Cydia app is already available, so you can install nice tweaks right away.
One of the tweaks you can instantly try is SplitScreen on the iPad Air. Normally, only the iPad Air 2 is supported. Found on GitHub.
Jailbreak for iOS 6, iOS 7, iOS 8 and iOS 9: what method do you need?
You can find out which firmware version is currently on your device via Settings> General> Info> Version. You have the ability to jailbreak iDevices with the following firmware versions:
Use p0sixspwn (as untether or jailbreak tool, see explanation below) iOS 6.
- The Pangu team demonstrated a jailbreak, but not yet released IOS 8.
- IOS 9: The Pangu team released a jailbreak for Windows IOS 8.
- : Use evasi0n for iOS 6 (Appropriate from iPhone 3GS)
- 1 beta 2: use evasi0n 7 for iOS 7 iOS 6.
- 4 in combination with Windows: Use TaiG 2.
- 4 in combination with Mac: use PP IOS 8.
- use Pangu for iOS 7 iOS 7.
- use Pangu for iOS 8 iOS 7.
After running a jailbreak you will get access to Cydia, an alternative app store for applications and tweaks. Often, applications that do not comply with Apple’s selection policy and tweaks enable you to customize your iDevice components to your liking. Thus, a jailbreak is not the same as an unlock, which allows you to use a jailbrokek iPhone in combination with a provider of your choice. It is advisable to make a backup of your device before performing a jailbreak.
Why jailbreak? We have created separate articles about this: Jailbreaking: Why, Pros and Cons, and Jailbreaking: The Best Tweaks and Apps.
An inspiration for tweaks you can install using Cydia can be obtained from our overview of the best apps and tweaks. It is advisable to check that tweaks are appropriate for your firmware version before installing it, for example, using the iOS 7 Tweak Compatibility List or the iOS 8 Compatibility List.
Making a backup via iTunes
If the firmware version is jailbreak on your iPhone, iPod touch or iPad, you can instantly perform a jailbreak. Nevertheless, we strongly recommend that you make a backup of your data so that they can never be lost if something goes wrong. After making the backup via iTunes, you can sync with Apple’s iCloud if you wish. Specifically, if you have updated to your current firmware version of the air (OTA), this may cause problems with all jailbreak tools.
Read more about creating and restoring a backup for your iDevice in our very comprehensive Guide to iPhone and iPad Backup, the Ultimate Guide.
TaiG jailbreak for iOS 8.1.3 through iOS 8.4
The TaiG Chinese team has released an untethered jailbreak tool for iOS 8.1.3 through iOS 8.4. It is only installable on windows. The team has not released a jailbreak tool for Mac OS X yet. You can find it on the taig.com website.
TaiG released a jailbreak for iOS 8.3 at the end of June 2015. When it turned out that the vulnerabilities used in it were not poised in iOS 8.4, a jailbreak for iOS 8.4 soon followed.
PP jailbreak for iOS 8.4
The PP team is, like TaiG, from China. They already released an iOS 8 jailbreak for Mac but were accused of stolen TaiG’s code. With this code, they have now released a jailbreak for iOS 8.4, even on the same night that iOS 8.4 appeared.
Convenient is that PP is available for both Windows and Mac, while at TaiG, always use Windows.
Below are the download links:
- PP for Windows (iOS 8.4)
- PP for Mac (iOS 8.4)
It goes like this:
- Download PPGhost for iOS 8.4.
- Start PPGhost.
- In the PP tool, click the green button to start the jailbreak. On the second screen, click the second button to indicate that you have turned off my iPhone. The jailbreak starts now for granted.
- Wait for the process to complete. Do not do anything, even if a white screen appears.
- Unlock the iPhone and start Cydia.
TaiG jailbreak for iOS 8 through iOS 8.1.2
The TaiG team released a jailbreak for iOS 8 to 8.1.2. This is suitable for all iOS devices that you can install iOS 8, including the iPhone 6 and iPhone 6 Plus. An English version of the TaiG jailbreak for iOS 8 is now available for Windows on the taig.com website.
Pangu jailbreak for iOS 8 through iOS 8.1
The Pangu team released a jailbreak for iOS 8 and iOS 8.1. This is suitable for all iOS devices that you can install iOS 8, including the iPhone 6 and iPhone 6 Plus. An English version of the Pangu jailbreak for iOS 8 is now available for Mac OS X and Windows on the website and.pangu.io.
Pangu jailbreak for iOS 7.1 through 7.1.2
The Chinese hacker team Pangu released an untethered jailbreak for iOS 7.1.x in June 2014. The software is available for Mac OS X and Windows. This version of Pangu works on all iOS devices with iOS 7.1 through iOS 7.1.2.
evasi0n7 jailbreak for iOS 7 to 7.1 beta 2
For jailbreaking iOS 7.x you need the evasi0n jailbreak tool. The first version of evasi0n for iOS 7 appeared in December 2013. The software is available for Windows and OS X. The evasi0n jailbreak works for the following iDevices on the mentioned firmware versions:
- iPhone : iPhone 4 | iPhone 4s | iPhone 5 | iPhone 5c | iPhone 5s
- iPod touch: 5th generation iPod touch
- iPad : iPad 2 | iPad 3 | iPad 4 | iPad Air | iPad mini | iPad Mini Retina
Steps evasi0n 7 for iOS 7 jailbreak
We assume that you have already made a backup of your most important data. If your device is already running on a suitable firmware version and you do not want to restore it with iOS 7.0.6, you can proceed directly to step 8.
- If you use a code lock on your device, you must turn it off before you run the jailbreak. You can do this via Settings> General> Code Lock. In this menu, select Unset code and enter your code if requested.
- Download the jailbreak tool for Mac OS X or Windows and go to the folder in which you saved the jailbreak tool evasi0n.
- Windows: Open (or unzip) the ZIP file by double-clicking. If requested, select Extract all. Then open the folder named evasion-win-1.0 and open evasi0n.exe.
Mac OS X Mavericks: Open the DMG file by double-clicking. Click on the icon of evasi0n. Most of the time, you can not install programs from unknown sources. You can also make an exception once by holding down the Ctrl button while pressing the icon of evasi0n 7 and selecting twice for Open.
- Select the Jailbreak button and wait for the process to complete. Do not perform any actions on the device or in iTunes as long as the jailbreak process is still in progress. Certain parts may take up to a few minutes.
- Press this icon once. Then wait for evasi0n to announce that the jailbreak is complete. You will see texts as a ” Reading kernel ” while waiting.
- Should the process stop unexpectedly for more than half an hour or cause an error, you can restart the device and try again. You can restart an iDevice by holding down the Home and Power button simultaneously for more than 8 seconds.
- Open Cydia and wait until preparation the file system is complete and a respring takes place.
- You can now use Cydia.
p0sixspwn: jailbreak for iOS 6.1.3 to 6.1.5
Shortly after evad3rs appeared for iOS, iH8sn0w also released an ‘untether’ for iOS 6.1.3 and 6.1.5. The untether for iOS 6.1.3 to 6.1.5 has the name p0sixspwn and is suitable for the following iDevices:
- iPhone 3GS and newer
- iPod touch 4G and 5G
- iPad 1st generation and newer
Initially, p0sixspwn was only available as untether for the iPhone 3GS and iDevices with the A4 processor. Later, a similar jailbreak tool for iOS 6.1.3, 6.1.4 and 6.1.5 also appeared to support devices with the A5 and newer chipsets. p0sixspwn is available for Mac OS X and Windows.
After jailbreaking: use of Cydia
After performing the jailbreak, the alternative app store Cydia will be on your device. The Categories tab in Cydia lets you see an overview of the different types of apps and tweaks that you can download via Cydia. The tabs have the following meanings:
- Changes tab: The most recent additions in the offer.
- Manage tab: Here you will find the Packages and Sources options. Via packages, it is possible to remove software installed via Cydia. Through resources, you cannot add existing repositories by default.
- Search tab: targeted search for software in Cydia.
If you have found an application or tweak that you want to install via Cydia, select it by pressing it. Then press the top right of Install followed Confirm. Often you will need to run a respring or even a reboot after installing something via Cydia. You can do this by pressing the Restart SpringBoard or Reboot button.